DCR Packhorse Wheelset

Price range: £410.00 through £640.00

The DCR Packhorse wheelset offers the best in durability, reliability and self-sufficiency. These wheels have an incredible ability to withstand spoke failures, components that can carry huge loads, and the option of a dynamo hub to power a lighting and/or recharching system. Available in approximately three weeks from date of order. Read the full description below.

Description

Designed for one thing; to keep going. On and on and on…

These wheels are designed to keep going when others might falter.

They are designed to offer the ultimate durability in the rims, hubs and spokes. The spokes are thicker than usual at the J-Bend for a tighter fit in the hubs, which in turn have extra bearings, steel axles and freehubs for ultimate longevity and carrying capacity. The DT Swiss U623 Hybrid rims have thick spoke beds and their 25mm internal width means they suit tyres from 32c and up; the increased air volume giving you extra greater comfort, lower pressure and better grip. You can customise the freehub body and axle length.

Dynamo Lighting Compatible

We can build this wheelset using the exceptional SON28 dynamo front hub, meaning you will always have power for lighting or recharching devices when on the move. We can also build the wheelst with the SON 29 hub; please contact us if you are interested.

Spokes And Nipples

Sapim Strong and Race spokes are the obvious combination for this set, to provide exceptional strength and reliability. Using Sapim’s double square brass nipples and our nipple/spoke prep means that there are no doubts whatsoever as to their durability and strength. We provide a lifetime warranty on the build/spokes.

Critically the Strong spokes are thicker at the J-Bend than most common spokes. Most double butted spokes are 2.0mm at each end and 1.8mm in the central section to provide some comfort. The Strong is a single butted spoke, being 2.3mm at the elbow and 2.0mm for the rest. Their thick elbow means they fit nice and tightly into the hub (which is drilled at 2.6mm), leading to fewer vibrations and less fatigue from stress from the thousands of stress-cycles they go through in their lifetime. These are not needed throughout the wheelset, just on the rear drive side. The lighter, comfortable Race spoke is used elsewhere.

Extra High Load Bearing Hubs

The set comes with our own brand heavy duty, 6-bolt IS hubs with their weather treated bearings for high performance and excellent longevity/serviceability. These heavy duty hubs come with extra bearings – making a total of four bearings in the front and six in the rear – plus steel axles and freehub for ultimate carrying capacity and torque transfer. Alternatively, choose a dynamo hub option for an impressively strong set that also delivers power for lighting or recharching devices. Boost hubs are also available for this wheelset.

Available Specifications:

These wheels are 700c (suitable for 29’er tyres), and are available with any freehub.

Spares for this wheelset

Freehub

Rear Axle

Bearings

 

Additional information

Approximate Lead Time

3 Weeks

Rim Width

25mm internal

Wheel Diameter

700c/29er

Front Axle Type

Quick Release, 100x12mm, 100x15mm, Boost 110x15mm

Rear Axle Type

Quick Release 135mm, Thru-Axle 12x142mm, Boost 12x148mm

Freehub Type

Shimano HG 7-12 speed (with spacer), Campagnolo N3W, SRAM XD, Shimano Microspline

Weight

2830g – 3060g

System Weight Limit

180kg

Dynamo Front Hub?

No, SON 28